Text · page 34 of 86
Read the whole document on one page (all 86 pages, each with its own heading)
(9) Such sign shall not exceed four feet in height and 32 square feet in area in any nonresidential district. (10) Such sign shall not exceed four feet in height and 16 square feet in area in any residential district. (11) Such sign shall not be displayed for more than 30 days in a ninety-day period. (12) Such sign shall not be illuminated. (13) Such sign shall not extend above the first floor of any given building and shall not project beyond property lines. (14) Such sign shall maintain at least a five-foot setback from all property lines. (15) Such sign shall not impede the traffic or visibility of pedestrians, bicyclists, or motorists. §225-18.9 Sign provisions by zoning district. A. Residential districts. (1) No lot or use shall have more than one sign type, as provided for in 225-18.12. (2) Home occupation signs. Any home occupation permitted by the Village may have one sign following same procedure as non- residential, provided it does not exceed six square feet in area and four feet in height. The sign shall not be illuminated. (3) Permanent subdivision identification signs shall be permitted with the approval of the Planning Board. (4) The illumination of signs in residential districts is prohibited. B. Nonresidential districts. (1) No use or lot shall have more than two sign types, as provided for in. (2) Where multiple operations or uses are located on a single lot, such as, but not limited to, industrial centers, business parks, or shopping plazas, each use shall be permitted two signs of any type in addition to one freestanding sign for the lot. (3) Window signs shall not be included in the count of total allotted signage for any lot or use. §225-18.10 Billboards. A. Size requirements. (1) No billboard shall exceed a height of 35 feet above ground level as measured from the elevation of the ground at the center of the sign to the topmost edge of the sign face. (2) The maximum sign area for any one billboard shall be 380 square feet, inclusive of any border and trim, but excluding the base or pedestal. (3) For the purposes of this article, a back-to-back billboard shall be considered one sign area. B. Location. (1) Billboards shall only be permitted within the Industrial Zoning District of the Village. (2) No billboard shall be located within 500 feet of a residential district or the property line of any public or private school. (3) No billboard shall be located within 1,250 feet of any other billboard as measured from the center of each sign.