Text · page 48 of 51
Read the whole document on one page (all 51 pages, each with its own heading)
Streetlight Request Form Service Class 4 - Energy Only NYSEG Additional Instructions and Information 1) The municipality shall be responsible for all engineering, design, construction, mapping, maintenance, and record keeping of its facilities. Upon initially requesting a service connection, the municipality shall submit a map or detailed drawing of the geographical area to be lighted. 2) The municipality shall promptly notify the NYSEG of all subsequent fixture installations, removals, or replacements on an existing service connection. Notification for a replacement of a fixture in kind is not required. 3) Applicable to use of service for lighting of public streets, highways, roadways or other outdoor lighting for duly constituted public agencies, public authorities and public corporations. 4) The municipality may install lamps burning dusk-to-dawn only under this service classification. 5) The municipality shall identify lamp-fixtures in accordance with the latest NEMA Standards for high intensity discharge lamps and luminaries. 6) The municipality shall comply with all applicable codes and regulations--including the National Electric Safety Code. 7) The municipality shall label all poles with SC-4 using the designatin EO _ _ _ _, with the blanks being the 4 digit town code as assigned by NYSEG. 8) NYSEG will permit the municipality to attach its street lighting fixtures to existing wood poles along public property. Monthly pole attachment charge applies for each municipally owned mast arm or pole bracket supporting one or more luminaires. If a wood pole is jointly owned, the consent of the other joint owner is not required by NYSEG. If consent is required by the joint owner, then it may be acquired by the municipality without cost to NYSEG. 9) Where it is necessary for NYSEG to extend its distribution facilities to service connection point location(s), NYSEG shall bill the municipality costs and expenses. 10) The municipality shall provide access to lighting by means of a field investigation, to verify ballast compliance, lamp sizes, types, and numbers. 11) The municipality shall pay for each electrical point of connection of its overhead or underground facilities to NYSEG’s overhead or underground facilities. 12) At times, NYSEG or a joint-owner may be determine, or be required to, relocate or replace its facilities. If the municipality’s street lighting is making use of these same facilities, the municipality shall relocate or replace its street lighting, or transfer to substituted poles, or perform any other work required by NYSEG or joint-owner. 13) In cases of emergency, NYSEG or joint-owner may relocate, replace, remove or transfer the municipality's street lighting. The municipality shall reimburse NYSEG or joint-owner for the costs and expenses incurred. Internal Use