Text · page 126 of 141
Read the whole document on one page (all 141 pages, each with its own heading)
This document was a scan. Its text was produced by character recognition and may contain errors; check the original for exact wording.
EarthPlanter® #1 Commercial Self-Watering Brand Planting Instructions — Commercial Ground Models Thank you for your purchase. Your business is greatly appreciated by the entire EarthPlanter team! NOTE REGARDING SOIL YOUR EARTHPLANTER IS SPECIFICALLY DESIGNED TO USE A PEAT-BASED SOIL-LESS GROWING MEDIUM, WE RECOMMEND PRO-MIX BX AGTIV REACH NEVER USE: DIRT, BARK, OR COMPOST-BASED SOIL AS THIS WILL INTERFERE WITH THE PROPER OPERATION OF YOUR PLANTER. YOU CAN LOCATE YOUR NEAREST PRO-MIX DISTRIBUTOR HERE; httos://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae Need Help? Email us at [email protected] NOTE REGARDING PLANTER PLACEMENT EarthPlanter Commercial Models are designed to be used on hard surfaces. If you plan to place them on mulch, loose stone, grass, or dirt, a paver should be placed under the planter. This will ensure excess water can drain properly out of the bottom of the planter. Have Questions? Email us at [email protected] You can watch our installation videos here; https://www.youtube.com/watch?v=YEhOhLuU_uk Do Not Fill with Water until you’ve transported the planter to its location. Once filled the planter will be heavy $0 filling the reservoir should be done last. 1. Begin by wetting the Pro Mix as you add the soil to the planter (mix should be spongy not soaked). Make sure to fill the entire center wick. Osmocote or other slow-release fertilizer should also be incorporated into the soil, especially the upper layers. This will provide feeding for up to 3 months. Follow instructions and application rates closely. A liquid fertilization should also be scheduled weekly or bi-weekly depending on your growth goals. This will provide more immediate nutrients to keep your plants healthy and vibrant, especially during the heat of summer. Each plant is different so you should consult with your local nursery professional on the best option for your plantings. Step #1 is critical to the initial operation of your planter. Soil must be wet to prime the wick and ensure immediate self-watering benefits. 2. Do not compress the soil while adding, it should remain loose. Continue filling until approximately 2-3” from the top of the planter. 3. Begin planting. We recommend young plants with a developing root system. If planting a mature root ball make sure it’s the correct size for your planter. Also, be sure to loosen the soil around the root ball by gently compressing with your hands. You can also gently spray with a hose until the soil is loose and the roots are exposed. Once complete the root ball can be placed into your EarthPlanter. 4. Begin filling the water reservoir by removing the top fill plug and placing your hose into the opening. 5. When the planter is full you will see and hear water coming out of the bottom. This is our internal overflow system that ensures your planter cannot be overfilled and is a part of the planter’s normal operation. 6. Always replace the top plug after filling your planter. This keeps debris from entering the water reservoir. 7. Water the plants from the top to ensure the soil is completely moist. Once complete top watering is only required if you're planting in the summer and/or planting during extreme weather conditions. In this case you should top water your plants every other day for the first 7-10 days. Your planter is ready to go! For additional information visit www.earthplanter.com. You can also email us at [email protected] or call 877.815.9276.