Text · page 1024 of 1174
Read the whole document on one page (all 1174 pages, each with its own heading)
2.10. Ponds and Wetlands Areas of Ponds and Wetlands Key areas to inspect for ponds and wetlands include the following: PO 1. Drainage area PO 2. Inlet pipes and swales PO 3. Pond area and embankments PO 4. Pond outlet Note: This category includes the following practices: Wet ponds – have a permanent pool of water and may be divided into various “cells” Stormwater wetlands – have a variety of depth zones ranging from deep pools to shallow wetlands and are characterized by wetland vegetation It is recommended strongly to have as-built drawings and copies of previous inspections at hand, if available. Aerial photos may be needed to help direct the inspector to the pond or wetland location if it is obscured by vegetation. Figure 2.10.1. Key Areas for Level 1 Inspection of a Pond/Wetland Maintenance Guidance 35 Page 1024 of 1174