Text · page 1026 of 1174
Read the whole document on one page (all 1174 pages, each with its own heading)
PW 2. Pond Inlets Description: Free, unobstructed flow from the drainage area to stormwater ponds is necessary to prevent shallow flooding and even structural damage from flooding. Pond inlets can consist of pipes, ditches, swales, or other means to convey stormwater to the pond or wetland. Instruction: Look for all areas where water flows into the pond during storms. Note that there may be multiple points of inflow and types of structures (e.g., pipes, open ditches, etc.). Consult Table 2.10.2 below: Table 2.10.2 Pond Inlets Problem (Check if Present) Follow-Up Actions If the problem can be remedied with hand tools and done in a safe manner, remove vegetation, trash, woody debris, etc. from blocking inlet structures. Other: Inlets are buried, covered or filled with silt, debris, or trash, or blocked by excessive vegetation. Kick-Out to Level 2 or 3 Inspection: If the amount of material is too large to handle OR there are ANY safety concerns about working in standing water, soft sediment, etc., the work will likely have to be performed by a qualified contractor. Inlets are broken, and, with pieces of pipe or concrete falling into the Kick-Out to Level 2 Inspection: These types of pond, there is erosion structural or erosion problems are more around the inlet, there is serious and will require a qualified contractor open space under the to repair. pipe, or there is erosion where the inlet meets the pond Maintenance Guidance 37 Page 1026 of 1174